Menu
Cart

EVANS WATERLESS COOLANT - PREP FLUID

  • £132.33


A unique range of non-toxic waterless coolants suitable for internal combustion engines. Evans coolants are proven to overcome the problems and limitations associated with water-based coolants.

The Science behind Evans

No Overheating

Traditional water based coolants regularly cross the thermal boundary that separates Efficient Nucleate Boiling (A) from Inefficient Critical Heat Flux. CHF leads to localised film boiling (B) and steam bubbles circulating throughout the cooling system, which often results in overheating and combustion issues. Evans Waterless Coolants boil above 180º C ensuring effective cooling and efficient fuel burn is maintained for all engine loads and ambient air temperatures.

More BHP

When water-based coolants vapourise adjacent to the combustion zone, hot-spots are formed. These hot-spots have been proven to cause pre-ignition in petrol engines and detonation issues in diesel engines. Evans Waterless Coolants eliminates hot-spots and subsequently improve combustion efficiency and increase power delivery.

No Corrosion

Water is the root cause of corrosion in all cooling systems, via oxidation (rusting) and galvanic (electrolytic) action. Evans coolants do not contain dissolved oxygen and have a much lower conductivity (increased resistivity) compared with water-based coolants. Subsequently replacing water with Evans non-aqueous solution eliminates corrosion and the need to periodically refresh or replenish the coolant.

No Pressure

Water requires additional (cap) pressure to prevent it boiling within the engine. This additional pressure can vary between 7psi and 29psi (0.5 Bar to 2 Bar) which places significant stress on cooling system components, including hoses, gaskets and radiators. Evans Waterless Coolants generate much lower pressures, in the region of 4psi, and therefore reduces strain on all components.

No Liner Pitting

Liner pitting is primarily caused by the rapid formation and collapse of small steam bubbles on the metal surface. Over several years this process can lead to severe surface erosion and deep liner pitting. Evans Waterless Coolants are not prone to forming vapour bubbles and proven, by SAE trials, to virtually eliminate surface erosion and pitting.

Evans Classic Cool 180° is formulated for engines that have nodular cast iron or aluminium blocks and fewer copper components. Trusted and recommended by top restoration experts.

Evans Prep Fluid is formulated to hygroscopically absorb water whilst flushing loose dirt and scale from all types of cooling system

Hygroscopic Engine Flush for: All Engines

Properties: Hygroscopically absorbs water.

When to use: After draining water from the cooling system.

Benefits: Ensures all residual water is removed from the system.


We Also Recommend